What Does TDS Mean in Your Water?

What Does TDS Mean in Your Water?

TDS stands for total dissolved solids: everything dissolved in your water that is not water itself. It is one of the most quoted numbers in water filter marketing, and one of the most misunderstood. Here is the meaning of TDS on a water report, what a good level looks like, and what it can and cannot tell you.

TDS meaning, in plain terms

If you evaporated a litre of water, TDS is roughly the weight of what would be left behind, measured in milligrams per litre (mg/L). Most of it is ordinary minerals and salts: calcium, magnesium, sodium, potassium, bicarbonates, chlorides and sulphates. These are what give water its taste, and they are why water from one town can taste quite different from the next.

What is a good TDS level?

There is no health-based guideline for TDS in Australia. The Australian Drinking Water Guidelines state that there are no health effects directly attributable to TDS, and set a guideline of 600 mg/L for good taste.

TDS (mg/L) Taste
0 to 600 Good
600 to 900 Fair
900 to 1,200 Poor
Over 1,200 Unacceptable

The guidelines also note that high TDS can cause scale in pipes, fittings and appliances, and that water with very high or very low TDS can be corrosive.

What a TDS meter can and cannot tell you

Handheld TDS meters are cheap and popular. They measure how well the water conducts electricity, then estimate TDS from that reading. That makes them useful for some things and misleading for others.

What a TDS meter is good for:

  • Comparing the overall mineral content of two water sources.
  • Checking whether a reverse osmosis system is still working, since a healthy membrane lowers TDS sharply.

What a TDS meter cannot tell you:

  • What is actually dissolved in the water. A reading of 150 mg/L could be almost all calcium, or a mix of many things.
  • Whether water is safe. Bacteria and viruses do not register, and contaminants such as lead or PFAS are present at levels far too small to move the reading.
  • Whether a carbon filter is working. Carbon reduces chlorine taste and smell, but it leaves most dissolved minerals in place, so the TDS reading barely changes.

A low TDS reading is not a sign of pure or healthy water, and a high one is not a sign of unsafe water. Be wary of any sales demonstration that uses a TDS meter to suggest otherwise.

How to find your TDS

Your water utility usually publishes TDS, or electrical conductivity, in its water quality reports for your supply area. That figure comes from laboratory testing and is more reliable than a handheld meter.

Which filters change TDS?

  • Reverse osmosis removes most dissolved solids and lowers TDS significantly.
  • Water softeners swap calcium and magnesium for sodium, so TDS stays roughly the same.
  • Carbon and sediment filters change taste, smell and clarity, but have little effect on TDS.

Vera uses sediment, KDF and carbon block stages, so it is designed to change how your water tastes and smells, not its TDS. If lowering TDS is your goal, a reverse osmosis system at the drinking tap is the right tool, and our assessment will tell you that.

Book a free in-home assessment

Sources


Tags:

Frequently Asked


What is the meaning of TDS on a water test?

TDS is total dissolved solids, the combined amount of minerals, salts and other substances dissolved in the water, shown in milligrams per litre.

Is low TDS water bad for you?

There is no health guideline for TDS in Australia. Very low TDS water can taste flat and can be slightly corrosive to pipes, which is why it is not automatically better.

Does boiling change TDS?

Boiling does not remove dissolved solids. Because some water evaporates, it can slightly increase the concentration of what is left.

Is a TDS meter worth buying?

It is useful for checking a reverse osmosis system or comparing two sources. It is not a water quality test, and it says nothing about safety.