Frequently Asked Questions

Straight answers
to common questions

Vera Care

Can I change the filters myself?

Yes. The Vera DIY Filter Set delivers Vera certified filters for all three stages to your door each year, with instructions so you can change them yourself. Only Vera certified filters work with the Vera system.

The lifetime warranty applies only with Vera Care, where a Vera specialist changes the filters and checks the whole system each year. Without Vera Care, the 12-month warranty applies. Your rights under Australian Consumer Law still apply.

Do I have to sign up for Vera Care?

No, Vera Care is your choice. If Vera installs your system, we talk it through at your assessment. If you order Vera Direct, you can add it when you order, in the areas we cover.

Either way, the system needs Vera certified filters changed every year to keep working as designed. Vera Care does this for you and keeps the lifetime warranty. With the Vera DIY Filter Set, you change the filters yourself using our instructions, and the 12-month warranty applies. Vera Care is never bundled into the installed price or spread across repayments, so you can weigh each on its own terms.

Do I need Vera Care to keep my warranty?

For the lifetime warranty, yes. It applies only while your system is on Vera Care, with all three filter stages replaced every year by a Vera specialist.

Without Vera Care, your system is covered for 12 months from installation, with your first set of filters included. Vera Direct comes with a 12-month warranty, or the lifetime warranty if you join Vera Care and provide the Certificate of Compliance for the original installation.

Your rights under Australian Consumer Law apply either way, and they cannot be excluded or reduced. Read the full warranty terms.

How much does Vera Care cost each year?

$605 a year including GST, from the second year after installation. Your first set of filters is already in the $3,880 installed price, so there is nothing to pay for care in year one. A second sediment change at six months is $165 including GST, $770 a year in total, and your assessment will tell you if your home needs it.

Is there a minimum term, and how do I cancel?

There is a one-year minimum term. After that, you can cancel with 30 days' notice by phone, email or online, and we confirm the cancellation in writing. If your plan renews, you hear from us in writing before it does.

What if something goes wrong between visits?

Ring us on 1300 90 VERA (1300 90 8372) and a person answers. You deal with the same Vera team that installed and services your system, so nobody hands you on to someone else.

If the problem is covered by your warranty, the repair, parts and call-out cost you nothing. Anything outside your warranty or the Vera Care schedule is quoted before any work is done.

Why are the filters changed every 12 months?

Twelve months is the interval the filter manufacturer recommends for all three stages. The cartridges are rated for up to 18 months, but that is the outer limit rather than the target. How fast a filter fills depends on your supply and how much water the house uses, so changing at 12 months keeps a margin.

Choosing a filter

Do carbon filters remove fluoride?

Standard activated carbon filters are not designed to remove fluoride. Reverse osmosis and some specialised filter media can.

Do I need a water filter in Australia?

Not for safety, in most cases. Mains water is treated and tested against the Australian Drinking Water Guidelines. Most people filter for taste, smell or scale.

How often do filters need changing?

Follow the manufacturer's schedule for your system. Jug cartridges often need replacing every month or two, while plumbed-in cartridges are commonly changed every six to twelve months, depending on the product and how much water you use.

What is the best type of water filter for a home?

The one that matches what you want to change and where you want to change it. A jug is fine for better-tasting drinking water. A certified under-sink system suits a specific contaminant. A whole-home system suits households that notice their water at every tap and shower.

Installation

Do I need to be home, and is there anything to prepare?

Someone needs to be home, or your Vera specialist needs clear access to the mains connection and the system. There is nothing to prepare, and most of the work happens outside.

Do you install in my area?

We install and service in the areas we cover across New South Wales, Victoria and the ACT. Check your postcode and you will know straight away. If we are not in your area yet, Vera Direct is delivered free anywhere in Australia for your own licensed plumber to fit.

Does it filter the hot water as well?

Yes. In a standard installation, the system sits before your hot water service, so hot and cold taps both run on filtered water.

Does Vera work with tank or bore water?

No. Vera treats mains water only. We can't treat water from rainwater tanks or bores.

How long does installation take?

Usually two to four hours, at the mains connection. We fit an isolation bypass at the same time, so future services do not mean shutting off the whole house.

What happens if I move house? Can Vera be relocated?

Yes. Vera relocates the system for you, so contact us for a relocation quote. If your new home is outside our service area, contact us to discuss your options.

What happens if my home needs extra plumbing?

We tell you at the assessment and quote the extra work separately, in writing, before you decide. The $3,880 covers a standard installation.

Who carries out the installation?

Our own Vera specialists, not a dispatch network or whoever is free that week. The person who installs your system is from the same business that comes back to service it.

Tank and bore water

Do I need to boil tank water?

Not routinely, if your tank is well maintained and testing is clear. Boiling (a rolling boil, then cooling) is a reliable way to make water safe if you suspect contamination.

Does tank water contain fluoride?

No. Rainwater has no added fluoride, so NSW Health suggests asking your dentist or community dental service about other ways to get it.

How often should I test bore water?

There is no single interval for every bore. Test before first use and whenever something changes, then follow the schedule your laboratory or Public Health Unit recommends for your supply.

Is rainwater safe to drink?

A well-maintained tank can provide good-quality drinking water. The main risk is microbial contamination from the roof, so maintenance, a first-flush device and regular testing matter. People with weakened immune systems should talk to their doctor first.

Should I be worried about PFAS in bore water?

Only if your bore is near a known PFAS-affected site, in which case your state agency's advice comes first. A NATA-accredited laboratory can test your bore if you are unsure.

Water quality

Do jug filters remove PFAS?

Some are certified to reduce PFOA and PFOS, and many are not. Check the certification listing for the exact model rather than relying on the packaging.

Does a water filter remove hardness?

Most do not. Standard carbon and sediment filters leave calcium and magnesium in the water. Softeners and reverse osmosis remove hardness, and some cartridges are designed to reduce scale forming.

Does boiling change TDS?

Boiling does not remove dissolved solids. Because some water evaporates, it can slightly increase the concentration of what is left.

Does boiling water remove PFAS?

No. Boiling does not remove PFAS, and because some water evaporates, it can slightly concentrate what is already there.

Is a TDS meter worth buying?

It is useful for checking a reverse osmosis system or comparing two sources. It is not a water quality test, and it says nothing about safety.

Is Australian tap water safe to drink with PFAS?

NHMRC's position is that health risks from PFAS in drinking water are low for most Australians, and that most supplies already meet the 2025 guideline values. Your utility's published results are the best way to check your own supply.

Is Australian tap water unsafe?

No. Mains water is treated and tested against the Australian Drinking Water Guidelines. A filter system is about making good water better, particularly how it tastes and smells day to day.

Is hard water bad for you?

No. The Australian guideline for hardness exists to limit scale in pipes and hot water systems, not to protect health.

Is low TDS water bad for you?

There is no health guideline for TDS in Australia. Very low TDS water can taste flat and can be slightly corrosive to pipes, which is why it is not automatically better.

Is soft water better?

Not always. Very soft water, under about 60 mg/L, can be slightly corrosive to pipes, depending on its pH and other characteristics. Water in the 60 to 200 mg/L range is classed as good quality.

What is the meaning of TDS on a water test?

TDS is total dissolved solids, the combined amount of minerals, salts and other substances dissolved in the water, shown in milligrams per litre.

Where is the hardest water in Australia?

Hardness varies by supply, and generally runs higher in areas that rely on groundwater or rivers through limestone country. Your utility's report is the only reliable figure for your home.

The system

How is Vera Direct delivered?

Vera Direct is delivered free to any address in Australia, with your first set of filters in the box and tracking details by email. A signature is required on delivery.

The Vera DIY Filter Set is posted once a year, with postage included. If anything arrives damaged or missing, tell us within 7 days of delivery and we will replace it at no cost.

Is a water filter system the same as a water purifier?

The terms are often used loosely. Jugs, tap filters and under-sink units treat water at one tap. Vera treats all the water that comes into your home. We do not offer an under-sink reverse osmosis system.

What is a whole-home water filter system?

It is a filter system installed where mains water enters your home, so every tap, shower and appliance runs on filtered water. Vera is a three-stage system, and standard installation is included with Vera Complete.

Cost

How much does Vera cost?

Vera Complete is $3,880 including GST, with standard installation by a Vera specialist, your first set of filters and a lifetime warranty with Vera Care. If your home needs extra plumbing, we tell you at the assessment and quote it separately, in writing.

Vera Direct, installed by your own licensed plumber, is $2,640 including GST, with free shipping Australia-wide, your first set of filters and a 12-month warranty.

What does it cost after the first year?

Vera Care is $605 a year including GST from the second year, for a yearly visit that changes all three filter stages and checks the system. Homes with five or more bedrooms, high daily water use or a well-watered garden can add a second sediment change at six months for $165 including GST, $770 a year in total.

If you would rather change the filters yourself, the Vera DIY Filter Set is $484 a year including GST and delivery, with instructions, or $660 with the second sediment filter.