How to Choose a Water Filter for an Australian Home

How to Choose a Water Filter for an Australian Home

Most Australian homes are on mains water that is treated and tested against the Australian Drinking Water Guidelines. So the useful question is rarely "is my water safe?" It is usually "what do I want to be different?" Answer that first, and choosing a water filter gets a lot simpler.

This guide walks through how to choose a water filter in five steps: know your water, decide what you want to change, choose where to filter, check the claims and count the running costs.

Step 1: Know your water first

Every water utility publishes the results of its testing. These reports cover hardness, pH, chlorine or chloramine, total dissolved solids and much more, each measured against the Australian Drinking Water Guidelines. They are the best place to start, and they cost nothing.

Three things are worth finding in yours:

  • The disinfectant. Whether your supply uses chlorine or chloramine. This is usually the source of the "pool" taste in a glass and the smell of a hot shower.
  • Hardness. How much calcium and magnesium is in the water, which decides how quickly scale builds up in your kettle and hot water system.
  • Any notices. Anything your utility has flagged for your supply area.

If you are on rainwater or bore water, there is no utility report for your supply. Testing through a NATA-accredited laboratory is the place to start, and our bore and tank water guide explains why.

Step 2: Decide what you want to change

Filters are built for different jobs, so be specific about yours.

  • Taste and smell. Chlorine taste in drinking water, or chlorine smell in the shower. Activated carbon is the usual answer.
  • Sediment. Fine grit, or discoloured water after mains work in your street. A sediment filter catches these particles.
  • Scale. The white crust on the kettle, shower screen and taps. Some filters are designed to reduce scale, and for very hard water a water softener is a different appliance altogether.
  • A specific contaminant. Lead from old plumbing, PFAS, or something your report flags. This needs a filter certified for that exact contaminant, and often a different technology such as reverse osmosis.
  • Microbial safety. Mostly a concern for tank and bore water. Sediment and carbon filters do not disinfect water; ultraviolet (UV) treatment, chlorination or boiling does.

If you cannot name anything you want to change, you may not need a filter at all. That is a perfectly good outcome.

Step 3: Choose where to filter

The next decision is how much of the house you want covered.

Type Where it works Good for Things to know
Jug One jug in the fridge Taste, on a budget Cheapest way to start. Small capacity and frequent cartridge changes
Tap-mounted One kitchen tap Taste, convenience Can slow the flow, and not every tap suits one
Benchtop One tap, through a diverter Taste, renters No plumbing work, but it takes bench space
Under-sink A dedicated drinking tap Taste, and specific contaminants if certified Plumbed in by a licensed plumber
Under-sink reverse osmosis A dedicated drinking tap Dissolved salts and many specific contaminants Sends some water to the drain and strips out minerals
Whole-home Every tap, shower and appliance Chlorine taste and smell everywhere, sediment, scale Installed at the mains connection, with a higher upfront cost

A rough rule: if you only care about the glass you drink, filter at one tap. If you notice the water in the shower, the laundry and the kettle as well, a whole-home system is the only type that reaches all of them.

Step 4: Check the claims, not the adjectives

Words like "purifies", "removes 99%" and "healthier water" mean nothing without a test behind them. In Australia, there are two things to check.

  • WaterMark. Any filter plumbed into your water supply must be WaterMark certified, which shows it is fit to connect to drinking water plumbing. Ask for the certificate number and look it up yourself.
  • Performance certification. The Australian Standard for drinking water treatment systems, AS 3497, requires performance claims to be certified against NSF/ANSI standards. As a guide, NSF/ANSI 42 covers aesthetic effects such as chlorine taste and odour, NSF/ANSI 53 covers specific health-related contaminants such as lead, and NSF/ANSI 58 covers reverse osmosis systems.

A good claim tells you what was reduced, by how much and under what test conditions. If a brand cannot tell you all three, treat the claim with caution.

Step 5: Count the running costs

Every filter needs new cartridges, and a filter that is not changed on time stops doing its job. Before you buy, find out:

  • What replacement cartridges cost, and how often they are needed.
  • Who changes them, and whether that needs a plumber.
  • What the warranty covers, and whether it depends on servicing.
  • For plumbed-in systems, what installation costs, and whether non-standard plumbing is extra.

Add the purchase price to five years of cartridges and servicing. That is the real number to compare between options.

A quick way to decide

  • Happy with the taste, and no scale problems: you may not need a filter.
  • Only the drinking water bothers you: a jug, tap or under-sink filter is likely enough.
  • Your report flags a specific contaminant: choose a system certified for that contaminant, often under-sink reverse osmosis.
  • You notice it in the shower, the kettle and the laundry too: consider a whole-home system.
  • You are on tank or bore water: test first, and get advice before choosing anything.

Where Vera fits

Vera is a three-stage whole-home system, with a sediment stage, a heavy metals stage and a carbon block stage, installed at the mains connection by Vera specialists so every tap and shower runs on the same filtered water. It is designed for mains-connected homes and focuses on chlorine taste and smell, sediment and scale. It is not a reverse osmosis system, and it is not suitable for tank or bore water. If a jug would do the job for your household, our assessment will tell you so.

Book a free in-home assessment

Questions people ask

Do I need a water filter in Australia?

Not for safety, in most cases. Mains water is treated and tested against the Australian Drinking Water Guidelines. Most people filter for taste, smell or scale.

What is the best type of water filter for a home?

The one that matches what you want to change and where you want to change it. A jug is fine for better-tasting drinking water. A certified under-sink system suits a specific contaminant. A whole-home system suits households that notice their water at every tap and shower.

Do carbon filters remove fluoride?

Standard activated carbon filters are not designed to remove fluoride. Reverse osmosis and some specialised filter media can.

How often do filters need changing?

Follow the manufacturer's schedule for your system. Jug cartridges often need replacing every month or two, while plumbed-in cartridges are commonly changed every six to twelve months, depending on the product and how much water you use.

Sources


Tags:

Frequently Asked


Do I need a water filter in Australia?

Not for safety, in most cases. Mains water is treated and tested against the Australian Drinking Water Guidelines. Most people filter for taste, smell or scale.

What is the best type of water filter for a home?

The one that matches what you want to change and where you want to change it. A jug is fine for better-tasting drinking water. A certified under-sink system suits a specific contaminant. A whole-home system suits households that notice their water at every tap and shower.

Do carbon filters remove fluoride?

Standard activated carbon filters are not designed to remove fluoride. Reverse osmosis and some specialised filter media can.

How often do filters need changing?

Follow the manufacturer's schedule for your system. Jug cartridges often need replacing every month or two, while plumbed-in cartridges are commonly changed every six to twelve months, depending on the product and how much water you use.