PFAS and Water Filters: What the Evidence Says

PFAS and Water Filters: What the Evidence Says

PFAS has been in the news, and in June 2025 Australia lowered its drinking water guideline values for several PFAS chemicals. If you are wondering whether you need a PFAS water filter, the honest answer for most households on mains water is probably not. Here is what the evidence says, how to check your own supply, and what to look for if you do decide to filter.

What are PFAS?

PFAS (per- and polyfluoroalkyl substances) are a large family of manufactured chemicals. Since the 1950s they have been used in non-stick coatings, water-repellent fabrics, food packaging and some firefighting foams. They break down very slowly, which is why they are often called "forever chemicals", and they can build up in soil and water near places where they were used heavily, such as some airports and defence sites.

What changed in 2025

On 25 June 2025, the National Health and Medical Research Council (NHMRC) updated the Australian Drinking Water Guidelines with lower values for four PFAS.

PFAS Guideline value
PFOS 8 ng/L
PFHxS 30 ng/L
PFOA 200 ng/L
PFBS 1,000 ng/L

A nanogram per litre (ng/L) is one billionth of a gram in a litre of water. Before the update, PFOS and PFHxS shared a combined value of 70 ng/L.

The values are set to protect health over a lifetime of drinking water. NHMRC's position is that health risks from PFAS in drinking water are low for most Australians, that most water supplies already meet the new values, and that drinking water is only one source of PFAS exposure. States and territories set the timelines for water suppliers to meet them.

In other words, the lower numbers reflect a more cautious standard, not evidence that tap water suddenly became less safe.

Is there PFAS in my tap water?

Your water utility is the place to look. Testing frequency is set by each state or water supplier based on the risks in each catchment, and many utilities now publish their PFAS results alongside their other water quality data.

If you live near a known PFAS-affected site, or rely on bore water near one, follow the advice of your state health or environment agency for that area. That advice is specific to the site and takes priority over anything general.

Which filters reduce PFAS?

Research by the US Environmental Protection Agency found that three types of point-of-use filter can greatly reduce PFAS levels in drinking water:

  • Granular activated carbon, which traps PFAS on the surface of the carbon.
  • Ion exchange resin, which swaps PFAS for other, harmless ions.
  • Reverse osmosis, which pushes water through a membrane fine enough to hold back most dissolved substances.

Performance varies between products and between different PFAS, so a filter's type alone does not tell you how well it works.

What to look for in a PFAS water filter

  • Certification that names PFAS. Look for certification to NSF/ANSI 53 for PFOA and PFOS reduction, or NSF/ANSI 58 for a reverse osmosis system, and check that the listing names PFAS specifically. In Australia, the drinking water treatment standard AS 3497 requires performance claims to be certified against NSF/ANSI standards.
  • Test levels. Certification tests are run at set concentrations, which may not line up with Australia's new guideline values. Ask the manufacturer what reduction was shown, and from what starting level.
  • A realistic filter schedule. Carbon and ion exchange filters have a limited capacity, and they only work if they are replaced on time. Reverse osmosis systems need regular cartridge and membrane changes.
  • The trade-offs. Reverse osmosis sends some water to the drain and removes minerals along with contaminants.

Where Vera stands

We do not make a PFAS reduction claim for Vera. Vera is a whole-home system designed around chlorine taste and smell, sediment and scale. If PFAS is your specific concern, a certified under-sink system at your drinking tap is the better fit, and we will tell you that plainly at the assessment.

Book a free in-home assessment

Sources


Tags:

Frequently Asked


Is Australian tap water safe to drink with PFAS?

NHMRC's position is that health risks from PFAS in drinking water are low for most Australians, and that most supplies already meet the 2025 guideline values. Your utility's published results are the best way to check your own supply.

Does boiling water remove PFAS?

No. Boiling does not remove PFAS, and because some water evaporates, it can slightly concentrate what is already there.

Do jug filters remove PFAS?

Some are certified to reduce PFOA and PFOS, and many are not. Check the certification listing for the exact model rather than relying on the packaging.

Should I be worried about PFAS in bore water?

Only if your bore is near a known PFAS-affected site, in which case your state agency's advice comes first. A NATA-accredited laboratory can test your bore if you are unsure.